Applications The Conlift1 is suitable for the pumping of condensate which is collected below sewer level or which cannot flow to the sewage system or drain of the building by means of a natural downward slope. Typical applications:
For condensate with a pH value above 2.5.
For condensate from air-conditioning systems,
cooling and refrigeration systems, air dehumidifiers and evaporators.
For condensate with a pH value below 2.5, use
Conlift2 pH+. Features
Fully sealed against moisture and evaporation.
Quick and easy installation.
Very silent and smooth operation.
Can be mounted on the floor or on a wall.
Pre-assembled non-return valve.
Pump operation test button.
Incorporates high-water float switch.
Fully automatic operation.
Inlet and discharge hose connectors included.
PRV connection:The discharge of pressure relief valves (PRV) of condensing boilers (<40kW) can be connect to the unit when discharge temperature not exceeds 90°C for a period of max. 5 Min. Discharge connection from PRV shall be according to boiler manufacturers instructions.
Any Newtonian liquid
Maximum liquid temperature:
Approvals on nameplate:
Power input - P1:
1 x 230 V
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Length of cable:
Type of cable plug: